Home  /  Government Contract Financing  /  Government Receivables Financing

Government Receivables Financing (AR Lines for Contractors)

Government receivables financing is a revolving line of credit secured by the invoices you have issued to federal, state or local agencies. Unlike factoring, you do not sell the invoices. The lender advances a percentage of your eligible receivables, you draw what you need, pay interest on the balance, and keep collecting from the agency yourself. It sits in the middle of the government contract financing spectrum: cheaper than factoring, slower and more demanding to set up, and reserved for contractors with steady billing and clean books.

At a glance

Advance rate70%–90% of eligible government receivables
Eligible receivablesAccepted invoices, usually under 90 days old, from a government payer
Line sizeTypically $30K–$5M, sized to the borrowing base
RateBank-priced lines often Prime + 1.75% to Prime + 9.75% (8.50%–16.50% at 6.75% prime); online lines 10%–99% APR
FeesOrigination, annual review, collateral monitoring, unused-line fee
Setup time1–3 weeks (online or specialty lender); 2–6 weeks (bank)
Draw speed after setupSame day to next day
Personal guaranteeUsually required
Written by Select Loan Advisors editorial teamLast reviewed 2026-09-13Editorial policy

Select Loan Advisors is an advisory firm, not a lender. The figures below are illustrative, and we explain how we're compensated before you apply.

How government receivables financing works

The structure is commercial invoice financing adapted to government payers. Three concepts drive it.

Borrowing base. Each month (sometimes each week) you send an aging report. The lender strikes ineligible invoices, applies the advance rate, and the result is your availability. Ineligible usually means over 90 days past invoice, disputed, subject to retainage, or from a payer the lender has not approved.

Assignment and lockbox. On federal contracts the lender takes an Assignment of Claims under FAR 32.802 so the agency pays a lockbox the lender controls. Collections sweep against the outstanding balance, and the difference is yours. On state and local contracts the lender uses a UCC-1 and, where the entity allows it, a notice of assignment.

Interest on the drawn balance only. If your availability is $300,000 and you draw $120,000, you pay interest on $120,000. This is the main cost advantage over factoring, which charges on the full face of every invoice whether or not you needed all the cash.

Worked example: the payroll gap

A janitorial and facilities contractor holds three federal building contracts. Illustrative figures:

  • Monthly billing across the three contracts: $260,000, invoiced on the first of the following month.
  • Weekly payroll and supplies: $40,000, paid every Friday.
  • Agency payment: contract terms are 30 days from a proper invoice under 5 CFR 1315.4; actual receipts average 45 days from invoice date once acceptance and corrections are counted.

Cash out before the first receipt on day 76: roughly 11 payrolls at $40,000, or $440,000. Steady-state, the contractor is always carrying about six to seven weeks of payroll ahead of collections, around $260,000.

With a receivables line at an 85% advance and a rate of Prime + 3.0% (9.75% at today's prime):

  • Eligible receivables at any point: about $390,000 (one and a half months of billing outstanding).
  • Availability: 85% × $390,000 = $331,500.
  • Average drawn balance to cover the gap: $260,000.
  • Monthly interest: $260,000 × 9.75% ÷ 12 = about $2,113, or roughly $25,350 a year.

Compare factoring the same $3.12 million in annual billing at 1.75% per 30 days with 45-day collection: 2.625% × $3.12 million = about $81,900 a year. The receivables line costs roughly a third as much. The price of that saving is a lender that wants two years of financials, a personal guarantee, monthly reporting and several weeks to close.

Neither structure funds the first four payrolls, which come before any invoice exists. That is a job for mobilization funding or a line sized to the award rather than to receivables.

What it costs

Cost Illustrative range Note
Interest Prime + 1.75% to Prime + 9.75% at banks; 10%–99% APR online Charged on drawn balance; variable with prime
Origination 0%–3% of line amount Often waived on renewal
Unused-line fee 0%–0.5% per year on undrawn availability Common at banks
Collateral monitoring Flat monthly fee or per-exam charge Specialty lenders more than banks
Annual fee Fixed, sometimes waived year one Wells Fargo publishes $95 to $175

Amounts, rates and terms shown are illustrative examples, not an offer or a quote. Cost ranges other than the Wells Fargo figures are industry-typical and should be read as directional.

Government receivables financing vs. factoring vs. a contract-backed line

Feature Receivables line Factoring Contract-backed LOC
What secures it Issued invoices Sold invoices The award itself
Funds pre-invoice costs No No Yes
Who collects You (into a lockbox) The factor You
Cost basis Interest on drawn balance Fee on full invoice Interest on drawn balance
Credit sensitivity Moderate to high Low Moderate to high
Setup 1–6 weeks 3–10 business days 2–6 weeks

If the gap is between award and first invoice, see how contract financing lenders size a line to the contract. If you sell product rather than services, government contract purchase order financing pays your supplier before the receivable exists.

The rules that matter

  • FAR Part 32 and Subpart 32.8. The lender's Assignment of Claims follows FAR 32.802 and 32.805: contract payments of $1,000 or more, a single financing-institution assignee, all unpaid amounts covered, and written notice to the contracting officer, disbursing officer and surety. The statutory basis is the Assignment of Claims Act, 31 U.S.C. § 3727 and 41 U.S.C. § 6305.
  • Prompt Payment (5 CFR 1315). The 30-day default due date and the 7-day return of improper invoices under 5 CFR 1315.4 define how old an invoice should get. Lenders use the 90-day eligibility cutoff because a federal invoice past 90 days almost always means a dispute. Late-payment interest at the Treasury rate, currently 4.75% for July 1 through December 31, 2026 (Treasury Fiscal Service), is paid automatically and flows into the lockbox.
  • Progress payments (FAR 32.5). If the contract carries progress payments at the small business rate of 85% of costs under FAR 32.501-1, the lender will treat progress-payment requests as receivables, but it will also account for the liquidation deducted from later delivery payments.
  • SBA CAPLines. The Working Capital CAPLine is an SBA-guaranteed asset-based line of up to $5,000,000 under 13 CFR 120.390. It behaves like a receivables line with a longer approval process and a variable-rate ceiling of base plus 3.0% on amounts above $350,000.

Prime vs subcontractor

A prime's federal receivable can be assigned under FAR 32.8. A subcontractor's receivable is owed by the prime, so the lender underwrites the prime and asks it to acknowledge the lockbox. On construction contracts, FAR 52.232-27 obliges the prime to pay you within 7 days of being paid, which lenders use to estimate your collection date. A subcontractor with one thin prime will get a lower advance rate than one with several well-capitalized primes.

Who this is not for

  • New awardees with no invoices yet. A receivables line needs receivables. Start with a contract-backed line or mobilization funding and add the AR line once billing is established.
  • Contractors under two years old or without financial statements. Most receivables lenders, and all banks, want two years of history. Factoring is more forgiving.
  • Anyone who needs cash this week. Setup takes one to six weeks. Factoring can fund in days while the line is being underwritten.
  • Businesses with heavy retainage or disputed invoices. Ineligible invoices shrink the borrowing base fast.
  • Contractors who cannot keep clean monthly books. Reporting is a condition of the line, and a failed field exam can freeze availability.

How to apply through Select Loan Advisors

One application, a soft credit pull to see options, and typically a same-business-day response. We review the aging, the contracts and your financials, then send the file to receivables lenders that already accept government payers. Funding partners pay us when a deal closes; the service costs you nothing, and we explain how it works up front. Have ready: current AR aging, the contracts with payment clauses, two years of financials, year-to-date statements, and SAM confirmation.

Sources

Common questions

What is government receivables financing?

It is a revolving line of credit secured by invoices you have issued to government agencies. The lender advances a percentage of eligible receivables, typically 70%–90%, and you pay interest only on what you draw. You keep invoicing and the agency pays into a lockbox the lender controls, with collections applied against the balance. It is a loan, not a sale of invoices.

How is it different from government contract factoring?

Factoring sells each invoice to a factor, which advances most of the value and charges a fee on the full face amount. A receivables line lends against invoices and charges interest only on the drawn balance, so it usually costs less. Factoring is faster and easier to qualify for; a receivables line requires stronger financials and reporting.

What makes a government invoice eligible for the borrowing base?

Lenders typically count invoices that have been accepted, are less than 90 days from invoice date, are not disputed or subject to retainage, and are owed by an approved government payer. Progress-payment requests may count with adjustments for liquidation. Ineligible invoices are excluded before the advance rate is applied, which is why clean invoicing directly affects your availability.

Does the lender need an Assignment of Claims?

On federal contracts, usually yes. FAR 32.802 lets a financing institution take an assignment covering all unpaid amounts under a contract with payments of $1,000 or more, with notice to the contracting officer, disbursing officer and surety. The assignment directs agency payments to the lender's lockbox. State and local contracts use a UCC filing and, where required, the agency's consent.

What rate should a government contractor expect on a receivables line?

Illustratively, bank-priced lines run about Prime + 1.75% to Prime + 9.75%, or 8.50%–16.50% at the current 6.75% prime, while online and specialty lines can range from 10% to 99% APR. Government receivables are strong collateral, so contractors with clean books and a two-year history tend to price toward the lower end. Funding partners set actual terms.

Find out where you stand

If you bill government agencies every month and factoring fees are eating margin, a receivables line is the usual next step. Send us your aging and contracts and we will say whether you qualify, at what advance, and what it should cost.

Check My Options →
Soft credit pull to review options. Select Loan Advisors is not a lender.