Home  /  Government Contract Financing  /  Government Contract Factoring

Government Contract Factoring (Federal, State and Local Receivables)

Government contract factoring is the sale of an accepted government invoice to a factoring company, which advances most of the face value within a day or two and collects from the agency itself. It is the fastest form of government contract financing, it is not a loan, and the approval decision rests mainly on the agency's obligation to pay rather than on your credit. Those three facts are why it is the first structure most contractors use and the one they most often outgrow.

At a glance

Advance rate on federal prime invoices80%–95% of face value
Fee1%–3% of invoice per 30 days; most fall between 1.5% and 2.5%
APR-equivalentRoughly 10%–79%, depending on how long the agency takes to pay
Setup time3–10 business days, including Assignment of Claims filing
Time to cash per invoice24–48 hours after the factor verifies acceptance
Minimum contract sizeContract must specify payments of $1,000 or more (FAR 32.802); factors typically want far more
RecourseRecourse is common; non-recourse costs more and covers only agency non-payment for credit reasons, not late payment
Personal guaranteeUsually required on recourse programs
Written by Select Loan Advisors editorial teamLast reviewed 2026-09-13Editorial policy

Select Loan Advisors is an advisory firm, not a factor. We match contractors to factoring partners that handle government receivables, and we say plainly when a cheaper line would serve you better. Costs and lender behavior below are illustrative; see how we're compensated.

How government contract factoring works

The mechanics are the same as commercial invoice factoring, with one addition: a federal assignment of claims that lets the factor get paid directly by the agency.

  1. Setup. The factor reviews the contract, your SAM registration, the payment clause and any bonding. It files a UCC-1 on your receivables and prepares the assignment.
  2. Assignment of Claims. The factor sends the notice of assignment to the contracting officer, the disbursing (payment) office and any surety. The contracting officer acknowledges it. Details are in the walkthrough below.
  3. You invoice as normal. You submit the invoice to the agency through its system, and a copy to the factor.
  4. Verification. The factor confirms the invoice was received and accepted. This is where clean invoicing pays off; a rejected invoice cannot be advanced.
  5. Advance. The factor wires 80%–95% of the face value, typically within 24–48 hours of verification.
  6. Collection. The agency pays the factor under the assignment, usually within 30 days of a proper invoice under 5 CFR 1315.
  7. Rebate. The factor releases the reserve (the unadvanced 5%–20%) minus its fee.

Under a recourse program, you owe the advance back if the agency does not pay for a reason the factor did not cause, such as a contract dispute. Under non-recourse, the factor absorbs the loss only if the agency fails to pay for credit reasons, which with the federal government is close to zero. The IFA notes non-recourse "does not protect you against late client payments" and is "more expensive and restrictive." For federal receivables, paying extra for non-recourse rarely makes sense.

Advance rates by receivable type

Advance rates move with the quality of the payer and the risk of dispute. These ranges are illustrative, drawn from published factor pricing and the IFA.

Receivable type Typical advance Typical fee per 30 days Why the range
Federal prime contract, services or staffing 85%–95% 1%–2.5% Strongest payer; disputes are rare once accepted
Federal prime contract, construction pay applications 70%–80% 2.5%–4.5% Retainage, lien risk and surety involvement
State agency 80%–90% 1.5%–3% Good payer; slower and less uniform than federal
County, municipal, school district 75%–90% 1.5%–3% Payment cycles vary widely by entity
Subcontractor invoice to a federal prime 75%–90% 1.5%–3% Underwritten on the prime's credit, not the agency's
Invoices with retainage or milestone holdbacks Advance on the net billable only Same Factors will not advance on money the agency is holding

The construction row deserves emphasis. Factors who take construction receivables at all usually cap advances near 70%–80% and price at the top of the range, because progress billings can be reduced by the owner and the surety has a claim on contract funds if you default on the bond.

The Assignment of Claims walkthrough

Claims against the United States generally cannot be assigned. The Assignment of Claims Act, at 31 U.S.C. § 3727 and 41 U.S.C. § 6305, makes a specific exception for financing institutions, and FAR 32.8 implements it. Here is the process as your factor will run it.

Step 1: Confirm the contract qualifies. Under FAR 32.802, the contract must specify payments "aggregating $1,000 or more," and it must not prohibit assignment. An agency may prohibit assignment "if the agency determines the prohibition to be in the Government's interest" (FAR 32.803(b)). Read the clauses. Most contracts include FAR 52.232-23, Assignment of Claims, which permits it.

Step 2: Confirm the factor qualifies. The assignee must be "a bank, trust company, or other financing institution, including any Federal lending agency." A factoring company generally qualifies as a financing institution. An individual investor does not.

Step 3: Draft the assignment. It must cover "all unpaid amounts payable under the contract," go to one party (or to an agent for several financing parties), and not be "subject to further assignment." You cannot factor some invoices under a contract with one factor and others with another.

Step 4: Send the notice. FAR 32.805 requires the assignee to forward an original and three copies of the notice of assignment, with a true copy of the assignment instrument, to the contracting officer, the surety on any bond, and the disbursing officer designated in the contract.

Step 5: Contracting officer acknowledgment. Before acknowledging, the contracting officer confirms that the contract was properly executed, that claims under it may be assigned, that the assignment covers only money due under that contract, and that the assignee is registered in SAM. The acknowledged copies come back with the date and hour of receipt.

Step 6: Payment redirects. From acknowledgment forward, the disbursing office pays the factor. Your invoicing does not change; the remit-to does.

Two cautions. Unless the contract carries a no-setoff commitment, which is rare outside defense, FAR 32.803(e) allows the government to "apply against payments to the assignee any liability of the contractor to the Government arising independently of the assigned contract." Unpaid federal taxes or a contract debt on another award can reduce what the factor receives, and under recourse that shortfall comes back to you. Second, because the assignment covers all unpaid amounts under the contract, releasing it at the end of the factoring relationship requires the factor's cooperation and a release filed with the same parties. Ask about release procedures and fees before signing.

Worked example: the payroll gap

A staffing contractor supplies eight technicians to a federal facility under a one-year task order. Illustrative figures:

  • Billing: $120,000 per month, invoiced on the first business day of the following month.
  • Payroll: $18,000 per week, paid every Friday, about $78,000 per month.
  • Contract payment terms: 30 days after a proper invoice. Actual first payment: 45 days after invoice, once acceptance and one correction are counted.

Without financing, the contractor funds roughly 11 weekly payrolls before the first agency payment arrives: 11 × $18,000 = $198,000 out before $120,000 comes in on day 75. The steady-state gap after that is about $150,000, or roughly two months of payroll.

With factoring at a 90% advance and 1.75% per 30 days:

  • Day 31: invoice for $120,000 submitted and verified.
  • Day 33: advance of $108,000 arrives.
  • Day 76: agency pays the factor $120,000.
  • Fee: 45 days at 1.75% per 30 days = 2.625% × $120,000 = $3,150.
  • Rebate to contractor: $12,000 reserve minus $3,150 = $8,850.

Annualized, the factoring fee is about 2.6% of revenue, or $37,800 on $1.44 million of billing. Whether that is acceptable depends on the margin. On a staffing contract with a 22% gross margin it is a real but manageable cost. On a 9% margin it is a third of the profit.

The first four payrolls, roughly $72,000, still come before any invoice exists. Factoring cannot help there. That is what mobilization funding covers, and a combined mobilization-plus-factoring structure is common on new awards.

The rules that matter

  • FAR Part 32 governs all federal contract financing. Subpart 32.8 sets the conditions and procedure for assigning your payments to a factor.
  • Assignment of Claims Act (31 U.S.C. § 3727, 41 U.S.C. § 6305) is the statute behind Subpart 32.8. Without it, the assignment would be void against the government.
  • Prompt Payment (5 CFR 1315, FAR 32.9). Payment is due 30 days after receipt of a proper invoice; improper invoices must be returned within 7 days; acceptance is deemed to occur on the 7th day after delivery unless disputed (FAR 32.904). Late-payment interest accrues automatically at the Treasury rate, currently 4.75% for July 1 through December 31, 2026 (Treasury Fiscal Service). Because the factor holds the assignment, interest penalties are paid to the factor; check your agreement for who keeps them.
  • Progress payments (FAR 32.5). If your contract carries progress payments at the small business rate of 85% of costs under FAR 32.501-1, you may not need factoring at all. Factors will also want to understand how progress payments and liquidation interact with the invoices they are buying.
  • SBA CAPLines. A Contract CAPLine under 13 CFR 120.390 is the long-term replacement for factoring for contractors who can qualify. It takes 60–90 days. Start it while factoring keeps the lights on.

Prime vs subcontractor

If you are a subcontractor, the Assignment of Claims Act does not apply to you, because the government owes the prime, not you. You can still factor your invoices to the prime. The factor underwrites the prime's credit and payment history, and it will usually ask the prime to acknowledge the factor as the payee. On construction contracts, FAR 52.232-27 requires the prime to pay you within 7 days of receiving payment from the government, which gives the factor a predictable collection date once the prime is paid.

Who this is not for

  • Contractors without accepted invoices. No invoice, no advance. Look at a contract-backed line of credit or mobilization funding for the pre-invoice period.
  • Contractors who can qualify for a bank or SBA line. Factoring at 1.5%–2.5% per 30 days costs several times what a line priced near Prime plus a spread costs. If your financials support a line, use factoring only as a bridge while the line closes. Compare government receivables financing first.
  • Contracts with heavy retainage or milestone holdbacks. Factors advance on net billable amounts. If half of each invoice is held, the advance will disappoint.
  • Contractors whose margin cannot carry the fee. Run the annualized cost against the gross margin on the contract. If the factoring fee exceeds a third of the gross profit, the contract may not be worth financing this way.
  • Contractors with unresolved federal debts. Government setoff under FAR 32.803(e) can reduce what the factor collects, and under recourse you make up the difference.
  • Anyone who plans to factor a single invoice and stop. Setup costs, UCC filings and the assignment make one-off factoring inefficient. It works best as a program over a contract's life.

How to apply through Select Loan Advisors

One application, a soft credit pull to see options, and typically a same-business-day response. We review the contract, the invoicing history and your margin, then place the file with factoring partners who already handle federal, state or local receivables. Funding partners pay us when a deal closes; the service costs you nothing, and we explain how it works and how we get paid before you commit. Have the signed contract, three months of invoices, your SAM confirmation and surety details ready.

Sources

Common questions

Is government contract factoring a loan?

No. Factoring is the sale of a receivable at a discount, not a loan, as the International Factoring Association defines it. The factor buys your accepted invoice, advances most of its value, and collects from the agency. Because it is a sale, it does not appear as debt on your balance sheet, though recourse programs do leave you responsible if the agency refuses payment for a reason unrelated to the factor.

How much does government contract factoring cost?

Fees typically run 1%–3% of the invoice per 30 days, with most programs between 1.5% and 2.5%, on top of setup, processing and UCC fees. On a $100,000 invoice paid in 45 days at 2% per 30 days, the fee is about $3,000. Expressed as an APR that is roughly 24%, and it rises if the agency pays slower. These figures are illustrative; funding partners set actual terms.

What advance rate can a federal contractor expect?

Advances on accepted federal prime-contract invoices for services or staffing are typically 85%–95% of face value. Construction pay applications draw lower advances, often 70%–80%, because of retainage and surety claims. State and local receivables usually land between the two. The unadvanced portion is held in reserve and returned, minus the fee, when the agency pays.

What is an Assignment of Claims and do I need one?

It is the FAR 32.8 procedure that lets a financing institution receive payment directly from a federal agency under the Assignment of Claims Act. The factor sends a notice of assignment to the contracting officer, disbursing officer and any surety, and the contracting officer acknowledges it. Most factors require it on federal contracts because it is the only way to ensure the agency pays them instead of you.

Can I factor invoices on a state or municipal contract?

Yes. State and local governments are reliable payers, and many factors buy their receivables at advances of 75%–90%. The federal Assignment of Claims Act does not apply, so the factor relies on a notice of assignment under the state's UCC and, where required, the agency's consent. Payment cycles vary more than federal ones, so expect the fee to reflect the entity's history.

Does factoring affect my ability to get progress payments or a bank line later?

Factoring does not prevent either, but the assignment must be released before a new lender can take its own assignment or a first-position UCC lien. Plan the transition. Many contractors factor for the first six to twelve months of a contract while building the financial history a bank or SBA CAPLine lender requires, then refinance into the cheaper line.

Find out where you stand

Send us the contract, your last few invoices and your weekly payroll figure. We will tell you whether factoring fits, what advance and fee to expect from partners that handle government receivables, and whether a line would serve you better.

Check My Options →
Soft credit pull to review options. Select Loan Advisors is not a lender.